Dean T Pierce Research Staff Contact piercedt@ornl.gov | 865.574.7797 All Publications Wire directed energy deposition of steel-aluminum structures using cold metal transfer process Interfacial microstructure and mechanical properties of rotary inertia friction welded dissimilar 422 martensitic stainless steel to 4140 low alloy steel joints Additive manufacturing as a processing route for steel-aluminum bimetallic structures The influence of temperature on the strain-hardening behavior of Fe-22/25/28Mn-3Al-3Si TRIP/TWIP steels... Impact of Materials Properties on Higher-Temperature Engine Operation... Evaluation of High-Temperature Martensitic Steels for Heavy-Duty Diesel Piston Applications... Evaluation of thermal processing and properties of 422 martensitic stainless steel for replacement of 4140 steel in diesel en... Alloy Partitioning Effect on Strength and Toughness of κ-Carbide Strengthened Steels... Quench and Partitioning Steels Hot Deformation Behavior of an Industrially Cast Large Grained Low Density Austenitic Steel... Impact of Materials Properties on Higher-Temperature Engine Operation... Understanding the microstructural stability in a γ′-strengthened Ni-Fe-Cr-Al-Ti alloy... Perspectives on Quenching and Tempering 4340 Steel... High temperature materials for heavy duty diesel engines: Historical and future trends... Microstructural evolution during quenching and partitioning of 0.2C-1.5Mn-1.3Si steels with Cr or Ni additions... Effects of strain rate on mechanical properties and deformation behavior of an austenitic Fe-25Mn-3Al-3Si TWIP-TRIP steel... Effect of Trace Levels of Si on Microstructure and Grain Boundary Segregation in DOP-26 Iridium Alloy... Quantitative investigation into the influence of temperature on carbide and austenite evolution during partitioning of a quen... Key Links ORCID Organizations Physical Sciences Directorate Materials Science and Technology Division Materials Structure and Processing Science Section Alloy Behavior and Design Group